Good standard ATX computer cases?

Links pleaseGood standard ATX computer cases?
http://www.newegg.com/Product/Product.as鈥?/a>Good standard ATX computer cases?
I got my new case at Altex Electronics because I needed a new power supply and my HP case was not standard. They have a great selection and I got a lower-end case; but WOW, it was really a good one and well constructed too.





http://www.altex.com/Tower-Cases--Mid-to鈥?/a>

Need a solid but cool computer case. Which do you recommend?

I'm going to be traveling a bit between my college and hometown and would like to bring my desktop computer (a fairly nice gaming PC.) My current case has good airflow, but I don't think it would do well on the train and car trips I'll have to take. Is there a case that is solid AND allows good airflow? I need suggestions! Please help!Need a solid but cool computer case. Which do you recommend?
Any case aimed at lan parties would be a good choice, but you might have trouble with size.





The CM Storm Scout has handles for good portability, the Antec 300 Illusion is fairly small, has good airflow (not a fan of tri-cool fans, though, they're pretty loud, might want to grab some quieter ones with better CFM).

After market computer cases?

i have a compaq presario SR5060AN desktop pc and i want to get an after market computer case i need to know which ones will allow me to fit all the components of my computer in themAfter market computer cases?
Use full tower case will fit all these and more if you want to add or upgrade later. Your old MB might or might not fit because it's OEM typeAfter market computer cases?
find out what motherboard is in your computer. cases fit standardized mother boards. ATX for instance is a motherboard type. any ATX case will fit an ATX motherboard. some computer ,anufacturers may custom make a motherboard so it will only fit their cases..
use a measuring device

urban decay cosmetics

Can computer case fans be powered by batteries?

I have a couple left over case fans and they say they are DC so I was going to use them in a little project I'm making. Are the volts and amps listed the required to power it... also which type will work underwater.. I can remember if it's the magnetic type or what not...Can computer case fans be powered by batteries?
Most computer fans are 12 VDC. The voltage and current should be listed on the fan someplace. I don't think they'll work underwater. They're designed to move air and won't have the power to push the much heavier water. They should run for a bit under fresh water. I don't know how long they'd last in salt water. The best thing to do might be to get a small battery operated pump. Remove the pump part, being careful not to hurt the seal of the motor, and connect the fan blade to the shaft of the pump motor. Or maybe the pump itself can do the job you want the fan to do.

CUSTOM COMPUTER CASE help me find correct size?

The computer I currently have is:





Acer AMD Phenom X3 Triple Core 8400 2.1GHz Computer (AM1201-E1721A)





I would like to know what size type the motherboard is [ATX etc] so I can buy a bigger case. I will be buying the case from tigerdirect so any suggestions would be appreciated. Thanks!CUSTOM COMPUTER CASE help me find correct size?
I have checked the specifications given by Acer but they do not give any information about the type of motherboard. There is a method of determing the type of motherboard which involves placing the computer sideways such that the side with the motherboard is closer to the floor and then looking into its back. If your computer has an ATX motherboard, the expansion slot covers should be on the right. If your computer has a BTX motherboard the expansion slot covers will be on your left. The positions are seen when looking into the back of the computer. Your computer will most likely have an ATX or micro-ATX motherboard. A micro-ATX motherboard will fit into a case for ATX motherboards but not the other way around.

What computer case should I get to lower my temps?

Ok I already have a case for my computer. BUT it has holes on the side to show off the very pretty, but totally usless blue lcd lights inside. I have had some temp problems and I think that the fans I have in the front and back aren't getting rid of the hot air cuz those holes don't allow a vacuum effect (my own theory). I have heard of cases that are airtight and can keep a computer really cool (like a refrigerator). but I can't find anything. So I need some help. Anything I can do to cool this thing down?


Here is some Info:


I have a dual core amd 930 X2. 3G Ram. A evga 6800 GS PCI express vid card.


I really don't want water cooling!!!


Please help me out here guys. Thanks.What computer case should I get to lower my temps?
I used water cooling and thought nothing could beat it...until I bought one of those oversized heat sink fan/coolers. I was amazed. I am getting lower temps than I did with liquid cooling.What computer case should I get to lower my temps?
First make sure the inside of computer is free of dust, etc. Next make sure fans are clean, and all vents. Your fans may be in the wrong places to create the effect. I haven't heard of the airtight case and am not sure it would work. Go to pcworld.com and you may find lots of info to help you.
How do you know you have a temperature issue?





That setup should not have any issues with heat unless it is either completely clogged with dust, or overclocked a large amount.





The best type of case for cooling, in my opinion is pretty much anything aluminum.





Lian-Li cases are some of the best aluminum cases as far as construction and cooling is concerned.














You do not want a case to be airtight. That would not allow the heat from the components to be vented out and you would SURELY overheat.





What you want is a case that moves air in from the bottom of the case and out on the top, as heat rises. Ideally, you want to have an equal amount of intake and exhaust fans. You do not want to create a vacuum as that will cause issues with airflow.
Open your case and use a big fan to cool the system. It works for me in summer.





Or you can just get a bigger case. You might want to install some additional fan to cool the system.
There are so many cases now with 120mm intake fan up front and a STRONGER 120mm exhaust fan at the back. Pick the model w/ minimal obstruction to airflow. I prefer just a grill and not the tiny holes. There are good cases from Antec, Lian Li, Coolermaster, Thermaltake, etc. But there are cheaper ones (all steel).





Just for laughs, here's my favorite beast:


http://www.peteredge.orcon.net.nz/casefa鈥?/a>

Quiet Computer Cases?

I need a quiet computer case that doesnt cost alot any ideas?Quiet Computer Cases?
look at this web site they will have something for sure!!!





http://www.xoxide.com





hope this helps!!

Will the coolermaster 310 elite mid tower computer case fit a high end gaming graphics card?

Im looking into buying a coolermaster 310 elite case becaus it's a good price and seems to be decient, my only question is, will it fit this High end 10.5 inch graphics cards? and will I fit it good, dose anyone here have one? is it good? and will it work out for me?Will the coolermaster 310 elite mid tower computer case fit a high end gaming graphics card?
Seems on the short side...but for $40USD who can complain?


Although IF and only IF it fits...you will have high temp problems...


(no cable management, a high end GPU will probably mess with your case airflow)





I recommend getting an Antec 902 case. It will run you about $120USD


but a worthy investment. I don't use a 902 (I have a 1200) but I've heard glowing reviews about it as a mid-tower.Will the coolermaster 310 elite mid tower computer case fit a high end gaming graphics card?
yea it will, not that good thogh find something with more cooling

Are computer cases amd/intel specific?

will an amd mobo fit in a case that originaly housed an intel mobo?





building comp for friend, and i never use anything amd, and then he went and bought a amd processor, so he f'd me all up... any other building things i should take note of?Are computer cases amd/intel specific?
Nope they're not processor specific, cases are built upon ATX size standard, either the case will support ATX sized mobos, microATX sized mobos, and some have it setup for both.Are computer cases amd/intel specific?
No, both Cases and Power Supply Units are ATX format. There are two types microATX like the small ones used by Dell, and the larger midsize to fullsize ATX cases. The ATX cases will fit the smaller microATX or mATX motherboards. Contractors for Intel and AMD create ATX and mATX boards for these processors. No you fine with the case, you will just need to take out the motherboard and replace it with an Intel Motherboard. Also with Power Supply Units they are usually 12v ATX, this means they will fit both microATX and ATX formats.


Have a nice day


Ken
Nope the cases uses form factors, not processor-basied design.





The only thing you will worry about is if the motherboard can fit in the case. A case that has a atx form factor will fit a motherboard that has an atx form factor (and micro-atx most of the time) but not an Eatx form factor.





BTW don't forget the other hardware, like cpu cooler, ram, power supply, hard drive, optical drive, operating system, and expansion cards if needed.





Also a anti-static mat and anti-static bracelet will be good too. BTW do not use magnetic screwdrivers. (not to put in the case but to prevent ESD damage)
NOPE! No Prob!


The case design isn't based on the processor. The case design is based on what motherboard -%26gt;Form Factor %26lt;- it will support, (Use)





ALL motherboards are based on a Form Factor.


Here, .....let me show you what I mean by Form Factor, and the various form factors there are,


http://en.wikipedia.org/wiki/Motherboard鈥?/a> Long page, scroll down.


The main two computer motherboard form factors are,


1.Micro-ATX


2.ATX


The Main form factor being used is ATX.


At almost the bottom, of the above links page, is a chart. You will see sizes listed for the various form factor's. This is based in Millimeters. You can go online, and use a Millimeter to Inches Converter, (Free) to change mm to inches, should you use inches. (I do!)





Inside the computer case is a Support Plate. This is where the mobo, (Motherboard), connects to.


On this support plate will be threaded holes. These are where the brass -%26gt;Standoff/s %26lt;- go. If it has slots, or non-threaded holes, it will use plastic Spacers.





Next to these threaded holes, or slots, (Or holes with no threads), are raised designations. (or stamped in) Matx stands for Micro-ATX.


ATX just stands for ATX, (Natch'!)





You use the appropriate holes, to match the form factor of the motherboard.





There is another thing. In the back of the computer case is an I/O Shield. This is a thin metal plate where the I/O ports go through.


I/O stands for Input/Output. Like the keyboard, mouse, monitor, game port,etc.


There should be an I/O plate in the back of the case already. It may not match the mobo you're trying to install. Most mobo's, come with an I/O shield in the box with the mobo.


You have to take the one that's in the case out. Then install the one that comes with the mobo, in the case.





The edges of this I/O Shield are SHARP! You can EASILY cut your finger, or fingers. Use care!


You can use an instrument like a flat blade screwdriver, and push hard in the middle. Some push in, some push out. Sometimes you can take the tip of the screwdriver, and work around the edge of the I/O Shield to remove it. Once you have a couple of edges going out, tap it with the screwdriver, or use pliers on one edge. You can EASILY bend the edge of the computer case, where this shield is installed!





Use finesse, and don't get hurt!





(Make sure ALL the standoffs, line up with the mounting holes in the mobo. If just ONE standoff is in the wrong place, (Doesn't line up with a hole),it can short the mobo out! It can touch an exposed solder joint on the bottom of the mobo.





If the mobo comes with fiber washers that go around the mounting holes, use 'em! Read what the Motherboard Manual says about this first! It may say yes, it may say no.


Rule of Thumb is to use fiber washers, if the mounting holes have no metal ring around them. Metal ring? Usually not used.


They go under the screw head)





Use the CD that comes with the mobo, FIRST! Then put the Operating System on.

urban decay cosmetics

How to remove standoffs in a computer case?

Im putting my motherboard into a new case and need the standoffs from my old case. but I dont know how to get them out. On the outside of the case they are hexagonal, and flush (flat) with the case, so i cannot use pliers to pull them out from the outside. on the inside of the case they stick out and have a screw hole in them. I guess I need to push them from the inside out, but i dont know how as they wont move if i try to twist, push pull...How to remove standoffs in a computer case?
Standoffs are almost always hexhead screws. Just use a pair of pliers and unscrew them. Only on one occasion did I ever see standoffs that were actually riveted to the motherboard tray.

Is there a way to know the Electrical Power consumed by a Power Supply without opening the Computer Case?

Dear all,





First of all, good afternoon. Secondly, I would like to know if there is a way to identify the electrical power consumed by a power supply without having to open the computer case. Any help is greatly appreciated. Thanks!!





Bye!! :)Is there a way to know the Electrical Power consumed by a Power Supply without opening the Computer Case?
You can measure how much electricity your computer is drawing from the AC wall outlet by using a Kill-A-Watt meter: http://www.amazon.com/s/ref=nb_ss_gw?url鈥?/a>





No cable cutting necessary. Plug the Kill-a-watt meter into your wall outlet, plug your PC into the Kill-a-watt meter. Done.Is there a way to know the Electrical Power consumed by a Power Supply without opening the Computer Case?
use a multimeter to measure amps being pulled by the power supply. The problem is that the measurement requires the meter be in series which mean you will have to cut AC cords hot and shunt it with meter. You can also use an ammeter that employs an inductance loop but again the AC cords outer insulation must be stripped and the induction loop must be place around the hot. After obtaining the amp being pulled, the wattage of the supply will be the product of the current (amps) and the voltage (volts) i.e. Power (watts) = I (amps) * E (volts) or if you find this method inconvenient or beyond your ability buy a commercially available metering device. Here is the URL of a company I have dealt with - %26gt; http://www.powermeterstore.com/index.php鈥?/a>
there are some devices you can buy that will tell you exactly how much power something is consuming. Basically plug the cable into this device and this device plugs in the power outlet.

I have a gateway sx. Can I put the motherboard in a different computer case?

its smaller than other computers so I was wondering if it would fit in a new case.I have a gateway sx. Can I put the motherboard in a different computer case?
I haven't actually seen one but I've seen pics of it on the net, but I believe since it's small you can comfortably fit in a mini or microATX case.I have a gateway sx. Can I put the motherboard in a different computer case?
Yes it should fit, what case were you looking at getting instead

Does anyone know the amp rating on the 12v system for a PA806 computer case with power supply.?

The only thing that I know is the the power supply is rated at 500watts. I need to know what the amperage is to determine what video cards I can put in my computer.Does anyone know the amp rating on the 12v system for a PA806 computer case with power supply.?
It is most likely similar to this:





Linkworld LPK2-30-P4 500W http://www.newegg.com/Product/Product.as鈥?/a>


rated for +12v@20A http://c1.neweggimages.com/NeweggImage/p鈥?/a>





most case-bundled units are mis-labeled and rated with max/peak wattage/current values that are misleading, it may not hold that 20A value for over a split-second before it shuts down or worse, causes the unit to fail. I would not put a load of over 60% on units of this type since it may put the hardware at risk.





Before you consider an upgrade, consider a reliable power supply such as this one





SeaSonic SS-300ES 300W http://www.newegg.com/Product/Product.as鈥?/a>


+12v@288w/24A http://c1.neweggimages.com/NeweggImage/p鈥?/a>





At least with this unit you know your limits, and is more capable than the generic 500w since it is both properly rated and made by a known reliable brand.








cheers

Question on old computers and computer cases?驴?

ok...what are the cases of computers made of...aluminum? or what, i want to sell them to a scrap yard and i'm jus wondering what they are made of so i can find out how much i can get from them...





then would i have to take all of the components out such as the mother board since those aren't metal also or que?lolQuestion on old computers and computer cases?驴?
Cases are usually made of steel. Aluminum cases are VERY light, you'll know when you see one.





And yes, take the components out. Those go to a separate recycler.Question on old computers and computer cases?驴?
any scrap metal dealer will buy them because they can be recycled but you are not going to get much money

Is it possible that I can buy a clear side for my computer case so that neon lights could show?

I have an HP Media Center, would I be able to do this?Is it possible that I can buy a clear side for my computer case so that neon lights could show?
i dont thinks hp sells any but depending on the size of your case u can get one from newegg pretty cheap.Is it possible that I can buy a clear side for my computer case so that neon lights could show?
i do not think so !

urban decay cosmetics

Do I need new computer case if I just want to change the power suppply?

I have a default emachine case and 250w power supply? I want to change power supply to 450w. Some guy at Fry's said I did.Do I need new computer case if I just want to change the power suppply?
some guy at fry's is a moron.





just make sure you know how to connect all the cables correctly and that your getting the right power supply type rightDo I need new computer case if I just want to change the power suppply?
The guy is an idiot. An ATX power supply will fit into an ATX case.
best bet is to take the old power supply with you to ensure an exact match most are universally fit. go to a comp usa or pc club , netseller etc. you dont need a new caes . then youd have to swap out the mother board etc. big hassle
The wanna be computer ';techs'; Got to love them for trying to upsell.





As with every one else says, no you dont need a new case.. Just make sure it is the right supply you need... Most power supplys are the same, only few are bigger or smaller and some range a bit on the setup on the back, but all in all most are the same...Just make sure your wire setup on the bord ATX power connector is the same sometimes the retail powersupplies are not very well ';quality controlled'; and you get a few that are backwards.





If you have any questions feel free to e-mail me on the e-mail address on my site. Let me know how it goes!


Jon Ellender Sr. Tech.


Texas Tech Services


visit us on the web @


http://texastech.mycv.bz
if you just want to change the power supply from 250w to 450w, you don't have to change the case, if you don't want it. just buy the power suppply.
You might need a new case if you have a slimline PC. Check with your computer manufacturer to make sure you get the right specifications for the power supply. Also make sure that one is the right size. Like I said before, your computer manufacture can provide you with a larger power supply that will fit in your case.
as far as I know (be warned I maybe wrong as it has happened before, although it happened on a wednesday) anyways... all power supplies are generic in size I doubt you'll have to buy a new computer case....





http://4einc.info
no. you dont have to. just buy a new smps (power pack) for your cabinet
Absolutely not!





Just ensure that the power supply that you buy is the same interface as the one you're currently using. Just look up your computer's operation manual, and you should see something near the power supply manual such as ';ATX';, or ';Mini-ATX';. You want to buy the corresponding type. It's most-likely to be ATX, though.

How am I supposed to know the fan size on my computer case?

there is only one for the back, how do I know if it is 120, or 80 ??How am I supposed to know the fan size on my computer case?
Measure the distance between the screw holes.How am I supposed to know the fan size on my computer case?
120's are pretty standard.





Worst case, just take the old one out, and take it to a computer store (you don't necessarily have to buy it there).





Check on www.tigerdirect.com or www.newegg.com

Dell Computer Cases?

I know where to get hold of a dell computer case but I am not sure what form factor it is. Do dell make they're cases so that you can NOT fit another motherboard in them??


Andy help wil be appreciated.Dell Computer Cases?
... an old Dell Case? Why? You should be looking at a modern case at http://www.newegg.com Read the ratings. Read the specifications and get one that Fits your needs.





But each model DELL is different. So your really have to specify exactly what model. I have an old Dell Dimension 4100 and it is very different than other model Dells that I have seen.





Look close at the Dell website http://www.dell.com and look for the manuals on that.





Good luck and Happy Computing!Dell Computer Cases?
most dell cases are of the ATX variety. However, some of their XPS line have a BTX case. They also have some MicroATX boxes for workstations as well, you will be able to spot those.
no u can easily fit other m/b in dell lappy's
If you have th ecase you can look it up on Dell website - there is a number on the side (SERVICE TAG) that relates to the unit - it will tell you all you need to know about the PC in it's orignal form.





It will be something like LN followed by 7 digits or letters in combination

What components should i get for this computer case?

Put this in your address bar:http://www.circuitcity.com/applications/SearchTools/item-details.asp?Sku=A406-1117 and tell me what components i need for it other than the motherboard.What components should i get for this computer case?
... if you're building a computer you'll need a lot more than just a motherboard.





Computer cases are just the shell... they don't actually do anything.


They have case fans for cooling, but other than that they don't do anything but protect the hardware.





You'll need the following:


* A processor


* A power supply


* A CPU fan


* A hard drive


* A disk drive


* Some RAM


* A video card (if the motherboard has integrated video you won't need a video card unless you want to play games... then you'll need a video card as integrated video cards a very poor at rendering games).


* Thermal paste for when you install the CPU fan





If you're just buying a new computer case and installing old hardware in it, then you'll only need the computer case.

Gaming computer cases?

i am building a gaming computer and i was wondering what is the best case out of the three. the antec twelve hundred, the coolmaster cosmos 1000 or the apevia x jupiter g typeGaming computer cases?
i use the antec 1200 very very nice case with stacks of fans!! but it is very big. If i was only using 1 video card i would have gone with a 900 besides that it's a great case lots of room to work around in an good for cable managment! Gaming computer cases?
The cooler masters truly are cool. Heat is a major issue when building a computer. I have a Cooler master and my case never gets hot even during intense summer. Make sure the form factor is ATX - this is the most commonly used and will fit your motherboard most likely (unless stated otherwise). If your motherboard is BTX form factor, get a BTX case; but this is unlikely.
Do a 'google' search on all three cases. Write down the highlights. Compare them. Check reviews on the 'net. Compare prices. What may be the 'Shizzle' for one user, may not be the 'Shizzle' for you!
I have always liked Lian Li cases...as well as CoolerMaster. Of course, my all-time favorites are Shuttle SFF. LOL